Effective ways to improve indoor soundproofing

It is unlikely that any building can please you with its excellent sound insulation, especially when it comes to panel houses. In order to be able to get rid of extraneous noise that can be heard from the street or from neighbors, it is necessary to carry out soundproofing work. To date, a huge number of different materials from leading manufacturers are presented, so you can choose exactly what you need.

As for effective methods of soundproofing, they include a floating floor or a soundproof ceiling. Naturally, such options will delight you with their excellent technical performance, but at the same time, they are quite expensive. But, you can go the other way, and try to eliminate the main sources through which noise enters your room. Despite the simplicity of these methods, they are quite effective. Let's look at the main ones.

Sockets

It is the sockets that are referred to as the first sources through which noise enters the room from the neighbors. Due to the fact that the sockets are installed in adjacent apartments in the same place, the noise bothers the neighbors. In order to get rid of such a problem, you need to dismantle the outlet, and then install a washer made of asbestos or mineral wool. After that, you need to seal using a special solution.

electrical box

Most often it is placed at the top of the wall, near the ceiling. You can fix the problem of noise penetration through the electrical box in the same way as through the outlet. But, it is worth remembering that a professional should do such work, since it is quite dangerous to do this without special skills.

Heating and water supply riser

With the help of special soundproofing materials, it is possible to carry out work due to which noise will not penetrate into the room through adjacent heating or water supply risers. If you do not know the features of this technology, then you can contact our specialists who will be happy to help you.

Joint between wall and floor

It is in such joints that cracks very often appear, which are justified by poor-quality performance of the cement screed. As a result, noise enters the room through these cracks. In order to get rid of such a problem, you need to remove the plinth and select a seam for the entire width of the screed. After it is ready, you need to use a special mixture. Sealant is used as a finish.